Cic-D120+ Ion Chromatography System Ion Exchange Chromatography Analysis Anions and Cations Ion Chromatograph

• Condition: New
• Flow Range: 0.001ml/Min~9.999ml/Min
• Operating Pressure: 10MPa
• Warranty: 1 Years
• High Pressure Pump Maximum Pressure: 42 MPa
• Customized Support: OEM
• Model NO.: CIC-D120+
• Name: Ion Chromatograph
• External Diameter of The Tube: 1/16"
• Type: Laboratory Benchtop
• Contact Material of The Rotor: Peek
• Classification: Other
• Flow Precision: ≤0.1%
• External Size(L*W*H*): 350*470*510(mm)
• Transport Package: Wood Box
• Trademark: Haicoer
• Origin: Shanghai, China
• Production Capacity: 5000 Set/Sets Per Month

Product Description

Product Overview

CIC-D120+ ion chromatograph

CIC-D120+ ion chromatograph is the third generation of SHINE basic intelligent product. The design of the instrument adopts a new concept from appearance to internal structure . It is a fully plasticized reagent-free product, which can be used in many fifields such as environmental protection, petrochemical, drinking water, food detection and other conventional and trace detection

Product Overview

(1) D120 + has a whole lifetime warranty, which defines a new benchmark for industry service, and makes the use of products more secure.
(2) It has the functions of pressure alarm, liquid leakage alarm and eluent alarm to protect the safe operation of the instrument in real time, alarm and shut down when liquid leakage occurs.
(3) The key components of the suppressor and chromatograph column have real-time monitoring function to ensure the timely replacement of consumables and ensure the stability and accuracy of the instrument operation.
(4) The gas-liquid separator can effectively remove the influence of bubbles on the test.
(5) Standard equipped with Shine high-performance autosampler, more accurate injection control.
(6) Start up and warm up. The instrument can be started up in advance according to the setting, and the operator can test directly at the unit.
(7) The software has the baseline deduction function and filtering algorithm to effectively remove the baseline drift caused by gradient elution, and the sample 12 response is more obvious;
(8) Automatic range conductivity detector, ppb-ppm concentration range signal is directly expanded, without adjusting the range

PRODUCT SPECIFICATIONS

Model	CIC-D120+
Autosampler	Standard configuration	Number of samples: 120 × 2mL (standard configuration). Maximum injection volume: ≥ 500 μL. Injection methods (three types): full loop/partial loop/Micro injection Injection repeatability: full loop injection: RSD ≤ 0.4%. Partial loop injection: RSD ≤ 0.5%. Micro injection: RSD ≤ 1.0%.
Flow Path	PEEK material	Chemically inert, metal-free PEEK flow paths, compatible with aqueous eluents of pH 0–14 and reversed-phase solvents
Pump	Type	High-pressure and low-pulse two-piston tandem advection pump
	4	Maximum Pressure	42MPa
	5	Flow Rate Range	0.001~9.999mL/min
	6	Tipping load	60kN
	7	Pressure Ripple	6750ml
	8	Max. torque	Pressure Ripple
Pump	Flow Precision	≤0.1%
		Flow Accuracy	Flow Accuracy
	External Diameter of the Tube	1/16"
Valve	Contact Material of the Rotor	PEEK
		Control Mode	By Stepper motor
		Power Supply	24V (DC)
Column Heater	Operating Temperature Range	Ambient + 5 to 60
		Controlling Temperature Accuracy	±0.1
		Temperature Stability	≤0.1/h
		Columns Supported	2, 3, 4 and 5 mm I.D. Maximum length 250 mm analytical column with 50 mm guard column.
Conductivity Detector	Type	Auto-range conductivity detector
		Cell Volume	Cell Volume
		Detection Range	050000μS/cm
		Resolution	≤0.0020nS/cm
		Output Voltage	Output Voltage
		Electronic Noise	0.02nS
		Baseline Noise	≤0.001μS/cm
		Baseline Drift	≤0.01μ
		Temperature Range	Ambient +5~60
		Controlling Temperature Accuracy	±0.01
		Temperature Compensation	1.7 %/
		Maximum Pressure	10.0MPa
		Instrument Linearity	≥0.999
		Quantitative Repeatability	≤0.5%
Power Supply	150W
External Size(L*W*H*)	350*470*510(mm)
Net Weight(KG)	26
Gross Weight(KG)	32

SIMILAR PRODUCTS

ABOUT US

FAQ

Q1What is your minimum order quantity? A1The minimum order quantity is very low, and the minimum order is one set. For customized projects, it depends on different requirements. Q2Do you offer guarantee for the products? A2Yes, we offer 1-2 years warranty to our products. Q3What is the delivrey time after an drder placed? A3Our standard delivery is 3-5days when we have stock.We will let you know the lead time according to your oder quantity in time. Q4What is the warranty? A4The free warranty is one year from the day of Commissioning qualified. Q5Can you tell me your main customers? A5Sorry we could not tell you except customer’s permission. At the same time,your information also will be protected. Q6How can i get the after-service? A6We will be responsible for our products in the valid time.